The new ARRI Hi-5 is the most sophisticated hand unit on the market, providing reliable wireless cameraand multi-axis lens control.
Weatherproof and solidly built, it features an exceptional radio link range and unique, swappable radio modules for different territories and shooting challenges.

1 Dragonne
1 Module radio Hi-5 2400MHZ DSSS (RF-EMIP)
1 Echelle blanche smart Hi-5
3 Batteries type NP-FM500H
1 Chargeur BC-QM1
1 Clé USB
1 Sangle Hi-5
1 Dragonne Hi-5
1 Protection écran Panzerglass Hi-5
1 Valise Pelicase

The Wireless Compact Unit WCU-4 is a lightweight, ergonomic hand unit offering up to 3-axis lens control. Rugged and splash-proof, it features an easy-to-read lens data display, lens mapping to pre-marked focus rings and focus tracking, for exemple of the slate at the beginning of a shot.

1 Dragonne
1 Sangle
3 Batterie NP-FM500H
1 Chargeur Batterie
1 Bague Blanche/Objectif
1 Carte SD
1 Flightcase

Sous Réserve de Disponibilité
1 Kit de 5 Bagues prémarquées (ft) (8″ ; 12″ ; 14″ ; 20″ ; 3’6)
1 Monitor Bracket
1 Plaque Accessoires

https://www.arri.com/en/camera-systems/electronic-control-system/wcu-4

The Single Axis Unit SXU-1 is a simple, single-channel hand unit that can be set up to control focus, iris or zoom. The SXU-1 can be used alongside the WCU-4 for separate iris control, operated by the DIT or cinematographer in situations where subtle exposure adjustments are required during travelling shots.

1 Sangle
2 Batterie NP-FM500H
1 Chargeur Batterie
1 Bague Blanche/Série d’Objectif

https://www.arri.com/en/camera-systems/electronic-control-system/sxu-1

The Zoom Main Unit ZMU-3A is a handgrip zoom controller that can be mounted on tripod pan arms while being connected to camera and motor.

1 Câble ZMU-3 / LCS Sur Alexa+ (LF / SXT / XT)
1 Câble Y ZMU-3 – CLM-2/4 – RS3(m) Sur Autres Caméras
1 Adapter ZMU / Poignées Bleues
1 Adapter Poignées Bleues / Manche Tête

http://www.aoassocies.com/wp-content/uploads/2016/12/arri_ZMU3_usermanual_en.pdf

The Zoom Main Unit ZMU-3A is a handgrip zoom controller that can be mounted on tripod pan arms while being connected to camera and motor. It includes a force sensitive zoom knob that assistants&8216; thumbs all over the world are familiar with.

1 Bracket WZE-3 / ZMU-3A
1 Batterie type NP-FM500H
1 Chargeur BC-QM1

The Master Grips have been designed fgrom the ARRIFLEX handgrips and now add a better ergonomy and some new possibilities to give the full control of the lens and the camera functions.

1 Master Grip rocker droit (MRR-1)
1 Master Grip roue gauche (MLW-1)
2 Extension poignée Master Grip 160mm
2 Clip cable 15mm
1 Cable moteur Lbus 35cm coude (LCB-F)
1 Valise Master Grip
1 Tube extension Master Grip

The small and compact OCU-1 allows camera operators to quickly take control of any lens function, even when lens motors are attached. With it, operators can override and reclaim focus, zoom, and iris controls from the WCU-4, at the touch of the button.

1 Bracket ø19mm
1 Réducteur tige ø19mm / ø15mm

The cforce mini RF is an intelligent lens motor with integrated white-coded ARRI radio module, eliminating the need for an additional receiver unit mounted on the camera. The cforce mini RF can pair with up to three hand units for split focus, iris and zoom operation, and provides full lens data when used with the WCU-4 hand unit.

1 Bracket ø19mm
1 Réducteur ø19:15mm
1 Câble Cforce RF / RS3(m) ou D-TAP En fonction de la caméra
1 Câble Y Cforce RF / RED ou SONY En fonction de la caméra
1 Antenne
1 Lot de câbles LBUS (LCB-3/4/A)

https://www.arri.com/en/camera-systems/electronic-control-system/lens-motors-and-lds-accessories/cforce-mini-rf

Cmotion et Arri ont développé ensemble le nouveau moteur intelligent Cforce Mini compact et léger. Idéal avec l’Alexa Mini qui utilise le même protocole et la même prise LBus, ce moteur procurera puissance et précision dans toutes les situations où la taille et le poids doivent être minimal.

1 Bracket ø19mm
1 Réducteur ø19:15mm
1 Lot de câbles LBUS (LCB-3/4/A)

https://www.arri.com/en/camera-systems/electronic-control-system/lens-motors-and-lds-accessories/lens-motors-and-lens-data-encoder

Developed in collaboration with ARRI, the latest addition to the cforce motor family « cforce plus » combines the convenience of cforce mini’s revolutionary function button with a brand new motor. Supplied with a new large 60 tooth gear, cforce plus is not only stronger but also faster than the original cforce motor. The recognizable twin LBUS connectors allow up to 3 cforce motors to be daisy-chained in any combination from any compatible cmotion or ARRI LCS while the new standard split clamp offers superior mounting flexibility. All cforce motors are compatible with cmotion’s compact LCS, cvolution LCS, pan-bar zoom, knob solo, ENG adapters plus ARRI’s ALEXA Mini, UMC-4 and AMC-1.

1 Bracket ø19mm
1 Réducteur ø19:15mm
1 Lot de câbles LBUS (LCB-3/4/A)

https://www.arri.com/en/camera-systems/electronic-control-system/lens-motors-and-lds-accessories/lens-motors-and-lens-data-encoder

The AMC-1 is a compact Motor Control Box with an LBUS interface which can connect up to 3 Cforce motors in series. The AMC-1 Motor Control Box is specially designed for light configurations such as on steadicam or drones.

Antenne

Flexible and affordable, the CLM-4 is a compact and lightweight lens motor. It is faster and quieter than the CLM-2. The CLM-4 will prove especially useful in tight situations with limited space, since the gear modules can be mounted either side of the motor. The motor offers rod-to-rod mounting options, a Hill Bracket rosette, as well as the standard rod bracket. The clamp console is adjustable and, crucially, the motor cable is detachable, allowing quick and easy on-set maintenance and trouble-shooting.

1 Réducteur tige ø19mm / ø15 mm
1 Bracket ø19mm

The CLM-2 is compact lens motor with integrated rod clamp and cable that has a proven its quality on hundreds of productions during the last 16 years. It offers extremely quiet operation under moderate torque and speed conditions. Additional inserts make mounting to 19 mm or 15 mm support systems possible.
The CLM-2 is fully compatible with all common lens gear systems.

1 Réducteur tige ø19mm / ø15 mm